Commerce Lesson Note SS1
FIRST TERM E-LEARNING NOTE
SUBJECT: COMMERCE CLASS: SSS 1
SCHEME OF WORK
WEEK TOPIC
1 Meaning, Scope and Functions of Commerce.
2 Occupation
3 Production
4 Division of Labour, Specialization and Exchange
5 Retail Trade
6 Small Scale Retailing
7 Large Scale Retailing
8 Modern Trends in Retailing
9 Wholesale Trade
10 Warehousing
11 Revision
12 Examination
WEEK ONE
TOPIC: MEANING, SCOPE AND FUNCTIONS OF COMMERCE
CONTENT
The Importance of Commerce
History of Commerce in Nigeria /West Africa
Divisions of Commerce
DEFINITION OF COMMERCE
Commerce is the study of production, distribution and exchange of goods and services aimed at satisfying human wants and in order to earn a living.
THE IMPORTANCE (FUNCTIONS) OF COMMERCE
1. It provides employment opportunities for the people.
2. It makes production and exchange of goods and services possible.
3. It improves the standard of living of people by making modern goods available.
4. It aids national and international co-operation by ensuring inter-dependence of nations
5. It facilitates division of labour and specialization.
6. It brings technological innovation and aids infrastructural development.
STAGES IN THE HISTORY AND DEVELOPMENT OF COMMERCE
(i) Earliest time: - Production was subsistent in nature.
(ii) Exchange of goods and services by barter.
(iii) Exchange of goods and services through the use of commodity money.
(iv) Introduction of money – notes and coins as a medium of exchange
(v) Improvement in aids to trade.
EVALUATION
1. What is Commerce?
2. State four functions of Commerce .
FACTORS THAT DELAYED THE DEVELOPMENT OF COMMERCE IN NIGERIA/ WEST AFRICA
- 1. Political instability
- 2. Low savings
- 3. Absence of developed markets
- 4. Poor communication system
- 5. Illiteracy
- 6. Inadequate capital
- 7. Low level of technology
- 8. Inadequate infrastructural facilities / poor infrastructural facilities
- 9. Low National income
FACTORS THAT HAVE CONTRIBUTED TO THE GROWTH OF COMMERCE IN NIGERIA/WEST AFRICA
1. Development of modern techniques of production
2. Political stability
3. Development of financial institutions
4. Development of efficient means of transportation and communication
5. Availability of warehousing facilities
6. Improvements in aids to trade e.g. Insurance, Advertising etc
7. Advancement in levels of education / literacy
DIVISIONS OF COMMERCE
Commerce can be grouped into two main branches or divisions namely:
1. Trade
2. Aids to trade
The aids to trade can be subdivided into:
(a) Transport (b) Insurance (c) Banking and Finance (d) Advertising
(e) Warehousing (f) Communication (g) Tourism
EVALUATION
1. Why is Commerce so essential to modern Society?
2. Set out carefully the principal divisions of Commerce and give an idea of the relative importance of each division.
READING ASSIGNMENT
1. Essential Commerce for SSS by O.A. Longe Page 1-8
2. Comprehensive Commerce for SSS by J.U Anyaele Page 29-36
WEEKEND ASSIGNMENT
1. The main divisions of commerce are (a) Home trade and foreign trade (b) Transportation and warehousing (c) Trade and aids to trade (d) Wholesale and Retail trade
2. Which of the following is not a benefit of commerce? It (a) Facilitates the movement of goods and services (b) Provides employment to people (c) Increases the cost of living (d) Makes funds available for business activities
3. All are aids to trade except (a) Advertising (b) Transportation (c) Retailing
(d) Banking
4. Which of the following can be defined as trade and aid to trade? (a) Advertising (b) Commerce (c) Warehousing (d) Retailing
5. Which of the following is not a basic want of man? (a) Transport (b) Food (c) Water (d) Clothing
THEORY
1. State three ancillary services to trade .
2. Mention three ways by which transport aids trade.
GENERAL EVALUATION
What is Commerce?
State and explain the importance of any five ancillary services to trade.
Give any five advantages of advertising.
State five ways in which warehousing is useful to businessmen.
In what ways does transport aid trade.
WEEK TWO
TOPIC: OCCUPATION
CONTENT
Classification of Occupations
Factors influencing Occupations
DEFINITION OF OCCUPATION
Occupation can be defined as any job that is legal in which people are engaged in order to earn a living.
CLASSIFICATION OF OCCUPATIONS
Occupations are classified into six major divisions namely:
1. Extractive Occupation
2. Manufacturing Occupation
3. Constructive Occupation
4. Commercial Occupation
5. Direct Services
6. Indirect Services
1. EXTRACTIVE OCCUPATION: This involves all kinds of works concerned with the extraction of natural resources from the soil, the sea or forest eg farming, fishing, hunting, lumbering, mining, quarrying etc.
2. MANUFACTURING OCCUPATION: Workers involved in this occupation are engaged in changing the form of raw materials extracted from the soil or sea into finished or semi – finished products e.g. raw rubber to vehicle tires, raw cotton to textile material etc.
3. CONSTRUCTIVE OCCUPATION: Workers involved in this occupation are engaged in assembling the various components from extractive and manufacturing industry and building them into organized usable structures eg bringing iron rod, cement, planks, sand, corrugated iron sheet to make a building.
EVALUATION
1. Give four examples of extractive occupations.
2. Give three examples of commercial occupations.
4. COMMERCIAL OCCUPATION: This is referred to as secondary occupation and comprises those groups of people who make it possible for goods and services produced to be made available to people who need them e.g. Insurance, transport, advertising, warehousing, communication, banking and finance.
5. DIRECT SERVICES: These include those whose economic activities involves giving satisfaction, amusement, entertainment and rendering personal services to others. They are services rendered directly and paid for directly e.g. barbing, musicians, doctors, steward, driver’s actors etc
6. INDIRECT SERVICES: These involve those who earn their living by rendering services to the public. The workers involved are paid by the government for the services they render e.g. civil servants, policemen, soldiers, customs, fire service personnel etc.
FACTORS INFLUENCING OCCUPATION
(i) Education and Training (ii) Natural skills and talent (iii) Remuneration
(iv) Government policy (v) Personal interest (vi) Nature of the job available
(vii) Age (viii) Sex (ix) Customs / family background (x) Geographical features
(xi) Natural Resources Endowment (xii) Extraneous factors e.g. health, life ambitions, peer pressure etc.
EVALUATION
1. Draw a diagram showing the six classifications of occupations.
2. Differentiate between Direct Services and Indirect Services.
READING ASSIGNMENT
1. Essential Commerce for SSS by O.A Longe Page 9-12
2. Comprehensive Commerce for SSS by J.U Anyaele Page 42-43
WEEKEND ASSIGNMENT
1. Which of the following is concerned with changing raw materials to finished goods? (a) Extractive occupation (b) Manufacturing occupation (c) Constructive occupation (d) Commercial occupation
2. Which of the following is not a function of commerce? (a) advertising goods (b) creation of goods (c) increasing profit made (d) distribution of goods.
3. An industry whose major actors consist of those engaged in sourcing raw materials from the earth surface is known as __________ industry (a) commercial (b) construction (c) extractive (d) mining.
4. The services offered by the following people could be grouped under direct services except (a) Doctors (b) entertainers (c) policemen (d) teachers.
5. The services of a teacher is in the classification of (a) commerce (b) direct services (c) extractive occupation (d) indirect services.
THEORY
1. List any four factors that affect employment.
2. Give four examples of commercial occupations.
GENERAL EVALUATION
State three ways in which businesses contribute to the development of the nation.
Explain with the aid of a diagram, the main divisions of Commerce.
List five importance of Commerce to the economy of Nigeria.
State five aids to trade and explain how each facilitates trade.
Describe five ways by which commercial banks facilitates trading activities.
WEEK THREE
TOPIC: PRODUCTION
CONTENT
TYPES OF GOODS
CLASSIFICATION OF PRODUCTION
FACTORS OF PRODUCTION
THE PROCESS OF PRODUCTION
DEFINITION OF PRODUCTION
Production is the changing of raw materials into finished goods and the distribution and provision of goods and services in order to satisfy human wants. Production is also referred to as the creation of utility. (Utility is the ability of any commodity or services to satisfy human wants).
TYPES OF GOODS
1. CAPITAL GOODS (PRODUCER GOODS): These are goods which are used for further production of goods and services e.g. raw materials, machines, trucks etc.
2. CONSUMER GOODS: These are goods and services which are ready for use by the final consumer e.g. bread, milk, services of a teacher etc.
CLASSIFICATION OF PRODUCTION
1. PRIMARY PRODUCTION: This involves the extraction of raw materials from the soil or sea e.g. mining, farming, fishing etc.
2. SECONDARY PRODUCTION: This entails the conversion of raw materials into finished or semi-finished products e.g. manufacturing of cars, fan, clothes chemicals e.t.c.
3. TERTIARY PRODUCTION: This is the stage where the goods and services made available at the above two stages are taken to those who are in need of them. It includes the activities of those who help to bring finished goods to the consumers e.g. transport, communication, insurance, banking etc.
EVALUATION
1. Differentiate between producer goods and consumer goods.
2. Explain the following terms and show the relationship between them.
FACTORS OF PRODUCTION
The factors of production are the resources that are combined together for production to take place. They are:
1. LAND: This refers to the resources provided free by nature e.g. soil, sunshine, rain, minerals, forest, fishing grounds etc. The reward for land as a factor of production is RENT.
2. LABOUR: Labour is the physical and mental efforts of man directed to the production process. Labour may be unskilled, semi-skilled or skilled. The reward for Labour is WAGES.
3. CAPITAL: This is the resources or wealth made by man that is used for producing further wealth e.g. machinery, motor vehicles, cash e.t.c
4. ENTREPRENEUR: This is the factor that organizes or co-ordinates other factors of production for more productive purposes. The reward for entrepreneurship is PROFIT
FUNCTIONS OF THE ENTREPRENEUR
1. Risk bearing
2. He takes decisions relating to the business.
3. Co-ordination of other factors of production
4. Provision of capital
5. He initiates the business.
6. Organization of research
THE PROCESS OF PRODUCTION
This refers to the series of activities and stages involved in creation of goods and services as well as getting them to the final consumer who will use them. Production is said to be complete when the goods and services produced reach the final user or consumer.
Therefore the production process includes the stages or activities of those who aid production and trade e.g. transport, warehousing etc.
EVALUATION
1. State five characteristics of land as a factor of production.
2. List six functions of the entrepreneur.
READING ASSIGNMENT
1. Essential commerce for SSS by O.A Longe Page 13 - 16
2. Comprehensive commerce for SSS by J.U Anyaele Page 47 – 49
WEEKEND ASSIGNMENT
1. The reward for labour as a factors of production is (a) interest (b) profit (c) rent (d) wages
2. The factors of production that combines other factors and bears the risk in the production process is (a) Capital (b) Entrepreneur (c) Land (d) Labour
3. Goods are given utility by (a) Changing their forms and location (b) Consuming them (c) Costing their value (d) Packing and measuring them
4. What is NOT the function of an entrepreneur (a) Bearing risks (b) Deciding on tax to pay (c) Deciding on what to produce (d) Organizing other factors
5. The reward for capital as a factor of production is (a) Dividend (b) Rent (c) Profit (d) Interest.
THEORY
1. Define Production.
2. List four factors of production.
GENERAL EVALUATION
What is production?
Explain the different activities involved in industrial, commercial and service occupations.
State five factors that have contributed to the growth of Commerce
Illustrate with a well labeled diagram the main divisions and subdivisions of production
Explain five reasons why communication is important in Commerce
WEEK FOUR
TOPIC: DIVISION OF LABOUR, SPECIALIZATION AND EXCHANGE
CONTENT
Definition of terms
Advantages and disadvantages of Division of Labour/ Specialization
Limitation of Division of Labour
Division of Labour is the breaking down of production processes into different stages so that each stage is undertaken or handled by an individual. For example, division of labour occurs in a textile factory where separate processes like spinning, weaving and dyeing are undertaken by separate workers in each case.
Specialization is the process whereby an individual, a firm or a country concentrates or limits its productive efforts on particular areas of production in which it has the greatest advantage over others.
The principal aim of both division of Labour and specialization is to increase output at a lower cost of production.
ADVANTAGES OF DIVISION OF LABOUR/ SPECIALIZATION
(1) Greater skill and dexterity of workers
(2) Increased total output
(3) It saves time.
(4) Less fatigue
(5) It makes possible the use of machines.
(6) Reduction in the cost of production i.e. per unit cost
(7) It enhances the development of technology.
EVALUATION
1. Divine the term Division of Labour
2. State five advantages of Division of Labour.
DISADVANTAGES OF DIVISION OF LABOUR/SPECIALIZATION
1. It makes work monotonous .
2. The use of machines reduces employment opportunities .
3. It brings about labour immobility .
4. Decline of craftsmanship .
5. Danger of increased inter-dependence among individuals, industries or countries.
LIMITATIONS OF DIVISION OF LABOUR
1) The size or extent of the market i.e. the extent of demand for the particular commodity
2.) The availability of Labour
3) The nature of the product being produced
4) The availability of capital i.e. to pay the various workers involved, buy raw materials, machines e.t.c
5) Government policy
EXCHANGE
Division of Labour and specialization create a situation where people have to depend on others to get the goods and services they do not produce.
This inter-dependence gives rise to exchange between individuals, firm or countries.
EVALUATION
1. Define Specialization.
2. Explain the difference between Division of Labour and Specialization
3. State three limitations of Division of Labour
READING ASSIGNMENT
1. Essential Commerce for SSS by O.A Longe page 16-18
2. Comprehensive for SSS by J.U Anyaele page 53-57
WEEKEND ASSIGNMENT
1. Who among the following engages in manufacturing occupation? (a) Bricklayer (b) Carpenter (c) Miner (d) Spinner
2. The factor of production that has a relatively fixed supply is (a) Capital
(b) Entrepreneurship (c) Land (d) Labour
3. Which of the following activities involves the extraction of raw materials?
(a) Baking (b) Building (c) Dressmaking (d) Fishing
4. At what time is production said to be complete? When the product (a) is made (b) is in the warehouse (c) is in the market (d) Gets to the consumer
5. Any human effort which leads to the satisfaction of wants is (a) Consumption (b) Organization (c) Production (d) Specialization.
THEORY
1. State four disadvantages of Specialization
2. List three Limitations of division of Labour.
GENERAL EVALUATION
State the difference between industry and commerce.
Mention and explain five types of commercial occupations.
With the aid of a diagram, illustrate the scope of commerce.
List seven factors that delayed the development of commerce in Nigeria.
State seven characteristics of land as a factor of production.
WEEK FIVE
TOPIC: RETAIL TRADE
CONTENT
Definition of Terms
Characteristics of the Retailer
Functions of the Retailer
Factors to be considered while setting up a retail business
Factors a retailer should take into consideration when making his purchases
Reasons why retail business may fail
TRADE
Trade (Trading) is the buying and selling of goods and services. It is divided into Home Trade and Foreign Trade.
Trade
Home Trade Foreign Trade
Retail Trade Wholesaler Trade
Import Export Entrepot
Home Trade involves the exchange (i.e. buying and selling) of goods and services within a country and sub-divided into wholesale trade and retail trade.
RETAIL TRADE
Retail trade involves buying in small quantities from the wholesaler or the manufacturer and selling in units (bits or fractions) to the final consumers.
CHARACTERISTICS OF THE RETAILER/RETAIL TRADE
1) The retailer sells in units or fractions.
2) The retailer stocks and sells a wide variety (range) of goods.
3) They sell directly to the ultimate consumers.
4) They buy in small quantities from the wholesaler or manufacturer.
5) The wares consists of fast selling products, mainly consumer goods.
6) A large number of small shops are involved.
7) They are the final link in the distribution chain.
8) Majority of the goods they deal in are obtained from the wholesaler.
FUNCTIONS OF THE RETAILER
A To the manufacturer:
(ii) He sells the goods produced by the manufacturer to the final consumer.
(ii) He helps in informing the manufacturer about the likes and dislikes of the consumers either directly or through the wholesalers.
(iii) He gives advice to the manufacturer.
B To the Wholesaler:
(i) He provides information about consumer needs and changes in market trends to the wholesaler
(ii) He gives advice to the wholesaler
C To the Consumer:
(i) Provision of a variety of goods
(ii) Granting of credit to credit –worthy customers
(iii) Provision of useful information and advice
(iv) Breaking the bulk i.e. selling in smallest quantities (units) to the consumer
(v) Provision of after – sales services e.g. installation, servicing e.t.c
(vi) Delivery of goods to the consumer‘s door free of charge
(vii) Preparing the goods for sale e.g. packing or re-packing the goods to different sizes to suit the needs of the consumers
(viii) Giving of personal attention to the consumer
(ix) Guiding the consumer in making their choices
(x) Completing the process of production e.g. branding of goods
(xi) The retailer advertises the goods.
(xii) The retailer ensures door-to-door services i.e. he brings the goods nearer to
the consumer
(xiii) Opening for business and selling at convenient
(xiv) Delivering goods to consumers on request
EVALUATION
1 Who is a retailer?
2 Outline six features of a retailer
3 Explain five functions performed by a retailer
FACTORS TO BE CONSIDERED WHILE SETTING UP A RETAIL BUSINESS
i) Amount of capital available;
ii) Location (or the site) of the shop;
iii) Experience and knowledge of the retail job;
iv) Layout of the shop i.e. the plan or design of the shop must be attractive;
v) Source of supply of the goods the retailer intends to deal in;
vi) The pricing policy and terms of trade i.e. whether to grant discounts, credits or sell solely for cash;
vii) The type or nature of goods to be sold;
viii) The details of the operating plans e.g. hours of business, opening time, trading days etc;
ix) How records will be kept.
FACTORS A RETAILER SHOULD TAKE INTO CONSIDERATION WHEN
MAKING HIS PURCHASES
1. Quantity of goods to be bought;
2. The extent of credit facility available to him;
3. Quality of goods must confirm to consumers needs and tastes;
4. The terms of payment i.e. discount given;
5. The cost of transporting the goods;
6. The method of delivery of the goods to him e.g. through road, rail, sea etc;
7. Any additional charges for packing or off-loading the goods;
REASONS WHY RETAIL BUSINESS MAY FAIL
(a) Wrong purchases;
(b) Poor recording keeping techniques i.e. inability to keep proper accounting records;
(c) Failure to insure the business;
(d) Extravagance, overspending i.e. spending the business money on personal expenses;
(e) Lack of experience or knowledge of the trade;
(f) Poor credit administration i.e. indiscriminate granting of credit facilities to customers;
(g) Inadequate capital for running the business and for expansion;
(h) Competition from bigger businesses;
(i) Inability to plan properly and forecast the future;
(j) Insensitivity to current market tends.
EVALUATION
1. Who is a retailer?
2. What factor would a retailer take into consideration in setting up an ice cream marketing business?
3 With the aid of a diagram show the divisions and sub-divisions of trade
READING ASSIGNMENT
1 Essential commerce for SSS by O.A. Longe page 20-34
2 Comprehensive commerce for SSS by J.U. Anyaele page 59-61
WEEKEND ASSINGNMENT
1 Which of the following is a function of a retailer to the consumer (a) Bulk buying (b) Breaking bulk (c) storage (d) production
2 Risks in business are borne by the (a) consumer (b) entrepreneur (c) marketing manager (d) personnel manager
3 Selling goods in small quantities for the benefits of consumers is a function of the (a) retailer (b) Wholesalers (c) manufacturers (d) factors
4 Trade may be defined as (a) Buying and selling of goods (b) Buying and selling of goods and services (c) Selling of goods and services (d) Distribution of goods.
5. Which of the following is not a function of the retailer (a) Advertising
(b) Provision of after-sales services (c) Manufacturing (d) Breaking bulk
THEORY
1. State three features of retail trade
2. List three functions of the retailer to the consumer.
GENERAL EVALUATION
List seven features of retail trade.
State eight functions of the retailer
Give seven reasons why a retail business would fail
List seven factors to be considered before starting a retail business
Explain six functions of Commerce in an economy.
WEEK SIX
TOPIC: SMALL SCALE RETAILING
CONTENT
Itinerant trading
Other types of small scale retailing
Reasons for the existence of many small scale retail businesses in Nigeria
Problems encountered by small scale retailers
There are several types of size of retail outlets which for easy analysis can be grouped into two, namely: Small scale and Large scale retailing
TYPES OF SMALL SCALE RETAILING
1. Itinerant Traders: The common feature of itinerant traders is that they move from place to place to sell, thereby making goods handy for customers i.e. goods are brought to the consumer’s doors. Examples of itinerant traders are hawkers, peddlers, gypsies etc
FEATURES OF HAWKING/ ITINERANT TRADING
1. Hawking is a form of small scale retail business.
2. It provides door-to door selling.
3. Hawking requires small capital outlay to set up.
4. It involves movement of goods from one place to another on the head by carts, by canoe, wheel barrows etc.
5. Hawkers do not pay rent
6. The goods are advertised to customers through shouting the wares, bell, horn, trumpet or loud speakers
ADVANTAGES OF HAWKING
1. It requires small amount of capital for its operation.
2. It provides door-to-door selling.
3. It is easy to start.
4. Hawking is a form of advertising.
5. Little or no running expenses is incurred by its operators i.e. no rent, wages etc is paid.
6. There is flexibility in its operations.
7. The goods are sold at cheap prices to customers.
8. Hawking provide employment opportunities to many who would otherwise have been unemployed.
DISADVANTAGES OF HAWKING
1. Hawkers are exposed to the dangers of road mishaps or accidents.
2. Hawking disturbs the flow of traffic i.e. it cause traffic hold-ups in urban cities e.g. Lagos.
3. Hawking deprives some children of their education.
4. Child abuse or child Labour is encouraged by hawking.
5. Hawking contributes to the littering of streets by generating refuse that are dropped on the roads.
6. Food items are exposed to health hazards e.g. dust, germs, unsanitary handling by hawkers.
7. Young hawkers are exposed to bad influence e.g. drugs, armed robbery, crime by social miscreants.
8. Hawking is stressful – hawkers are exposed to bad weather conditions like cold, intense heat e.t.c.
9. Hawking is an important avenue for the sale of fake or sub-standard goods.
10 Government is deprived of revenue as most hawkers do not pay taxes or rates to the local government.
11. Young girls engaged in hawking could be assaulted sexually leading to early pregnancies.
OTHER TYPES OF SMALL SCALE RETAILING
2. Street retailing or Roadside Traders.
These are traders who display their wares along the streets, roads or outside the gates of schools, companies or offices in town and cities.
3. Market Traders or Stall Holders
These are traders found in established markets and who operate by arranging or displaying their wares (goods) on tables, sheds or stalls. They are traders who do not operate from fixed shops.
EVALUATION
1. State five advantages of hawking.
2. State four disadvantages of small scale retail trade.
3. Explain five ways in which the activities of hawkers constitute a disadvantage to the economy.
OTHER TYPES OF SMALL SCALE RETAILING
1. KIOSKS: These are retail outlets that offer very limited range of consumer items e.g. cigarettes, sweets, provisions, newspaper and magazines, stationery; phone cards/call services etc. They are usually sited at places where customers frequently pass such as junctions, motor parks etc
2. Small Store or Single Shops: These are small stores found in front of residential houses or at shopping complexes. They are conveniently located for customers and are found in both urban and rural areas.
3. Tied Shops: These are shops that confine what ever they sell to single commodity which their producers supply direct to them. The shop owners are supported with finance equipment/machinery for the sale of such products by the manufacturer. Tied shops sell single product like ice cream, soft drinks, petroleum products, beer etc.
4. Mobile shops: These are motor vans or lorries used as shops with goods well arranged. They build up regular customers and are very convenient for consumers in remote areas. They advertise by music, microphone announcement, public address system, jingles etc.
REASONS FOR THE EXISTENCE OF MANY SMALL SCALE RETAIL BUSINESSES IN NIGERIA/WEST AFRICA
1. Lack of sufficient capital that could be used to established large retail business
2. Low savings as a result of low per capital income
3. High rate of unemployment and the difficulty in getting white collar jobs
4. Absence of developed markets
5. Small scale business requires small capital which is within the reach of many people.
6. Small scale retailing is attractive as it involves low running expenses.
7. There is flexibility in its operations: The owner can combine it with other forms of occupation and it can easily be adapted to changing conditions where necessary.
PROBLEMS ENCOUNTERED BY SMALL SCALE RETAILERS
1. Competition from big businesses e.g. price competition
2. Insufficient capital for investment and expansion of business
3. Inability to secure an ideal location because of congestion especially in urban areas
4. Bad debts i.e. inability of the business to collect debts from its debtors.
5. Unlimited liability – Small scale businesses are usually in the form of sole proprietorship or partnership.
6. Disturbance from government agencies like urban planning, revenue officials, environmental protection agencies e.t.c
EVALUATION
1. Differentiate between a kiosk and a tied shop
2. What is the similarity between a mobile shop and hawking?
3. Why are there many small scale retail traders in Nigeria?
READING ASSIGNMENT
Essential commerce for SSS by O. A Longe Page 21 - 25
WEEKEND ASSIGMENT
1. Peddling and hawking are examples of (a) large scale retailing (b) small scale retailing (c) medium scale retailing (d) small scale wholesaling
2. The term ‘enterprises’ denotes the ability to (a) bear risk (b) control other factors of production (c) maximize profit (d) organize other factors of production
3. Buying and selling of goods and services within the geographical area of a country is called ________ trade (a) entrepot (b) external (c) domestic (d) import
4. Which of the following is an example of itinerant trading? (a) mobile shop (b) mail order business (c) stall holding (d) selling from kiosk
5. Which of the following is not a retail outlet? (a) mobile shop (b) tied shop (c) discount house (d) kiosk
THEORY
1a. Who are itinerant traders?
b. State four features of hawking.
2. State three reasons for the survival of small scale retailers in Nigeria
GENERAL EVALUATION
Explain five activities involved in Commerce
State three uses of capital as a factor of production
State four uses of land as a factor of production
List six functions of an entrepreneur
Explain five advantages of small scale retailing
WEEK SEVEN
TOPIC: LARGE SCALE RETAILING
TYPES OF LARGE SCALE RETAILING
A MULTIPLE SHOPS OR CHAIN STORES:
These are large scale retail businesses consisting of a number of similar shops or branches spread or located in different towns/ cities all over a country. They sell the same type of goods and all the shops are controlled from the head office e.g. Lennards, Challenge Bookshop, Famad etc
FEATURES OR CHARACTERISTICS OF MULTIPLE SHOPS
1. Standard or identical shop design.
2. Dealing in one line of product in their branches.
3. They have centralized form of administration and ownership.
4. They operate on the basis of cash and carry.
5. Prices of goods sold in all branches are fixed by the head office.
6. They practice self-service.
ADVANTAGES OF MULTIPLE SHOPS
1. They are easy to identify.
2. Staff can be moved between branches.
3. Their cash and carry system reduces the incidence of bad debts.
4. They save a lot of cost in advertising.
5. Unsold stock in one branch can be moved to other branches.
DISADVANTAGES OF MULTIPLE SHOPS
1. They deal in limited range of products.
2. The cost of setting up multiple shops all over the country is very large.
3. They do not offer credit facilities to customers.
4. No personal attention is given to customers.
5. Less control is exercised by branch managers.
B DEPARTMENTAL STORES
This is a large single retail outlet selling a wide variety of goods in separate departments. Each department specializes in a particular line of goods different from those of other departments.
A departmental store is often referred to as many shops under one roof and common management e.g. UTC Stores, Cash and Carry, UAC Stores etc.
FEATURES OF DEPARTMENTAL STORES
1. They are divided into different departments.
2. Buying and selling is decentralized.
3. They deal in a wide range of goods.
4. They practice self-service
5. They are located in the centre of cities and urban areas.
ADVANTAGES OF DEPARTMENTAL STORES
1. They stock a wide variety of goods.
2. They are easily located by customers.
3. There is self service and orderliness.
4. Impulse buying is possible as shoppers move from one department to another.
5. Goods in one section help to advertise goods in other sections.
DISADVANTAGES OF DEPARTMENTAL STORES
1. Lack of personal attention for customers.
2. High running expenses/overhead costs.
3. Pilfering and shoplifting (i.e. stealing of goods) is rampant.
4. It requires large capital to set up.
5. They do not allow customers to return goods.
6. They give little or no credit to customers.
EVALUATION
1. Describe any four features of a multiple shop
2. With the aid of a diagram, illustrate six branches of trade and show six types of retail outlets
3. List three disadvantages of departmental stores to (a) The customers (b) The owners
TYPES OF LARGE RETAILING
C SUPERMARKET
This is a large scale retailing shop offering for sale, principally by self service, house hold goods like groceries, provisions, tinned foods, frozen food, vegetables, fresh fruits etc.
FEATURES OF SUPERMARKET
1. They operate the system of self service.
2. They deal in a wide range of goods
3. They are located in urban centers e.g. Lagos.
4. They stock household goods and food items
5. They operate with few sales attendants
THE ADVANTAGES AND DISADVANTAGES OF SUPERMARKETS ARE SIMILAR TO THOSE DEPARTMENTAL STORES.
D HYPERMARKETS
These are extra large or giant supermarkets that deal in greater variety of goods. They are usually located at the outskirt of town and cities. Unlike supermarkets, hypermarkets also deal in consumer durables and they offer car parking facilities for customers
E MAIL ORDER BUSINESS
This is a form of large scale retailing in which buying and selling is carried out through the Post Office or through agents.
The Mail Order firms contact prospective customers by mail, receive their orders by mail and make delivery of goods to customers also by mail. It involves the use of specially prepared catalogues that presents the retailer’s products both visually and in writing.
FEATURES OF MAIL ORDER BUSINESS
1) Retailing is done through the Post Office or through agents.
2) Intensive advertising through catalogues, newspapers is involved.
3) They deal in a wide range of durable goods.
4) It requires a large warehouse for storing goods.
5) It requires few workers for its operations.
ADVANTAGES OF MAIL ORDER BUSINESS
1. The business pays low rent as it can operate a warehouse located out of town.
2. It requires few salesmen or sales assistants.
3. Expensive fixtures and displays are not needed.
4. They provide a variety of goods.
5. There is opportunity for advertising through catalogues.
DISADVANTAGES OF MAIL ORDER BUSINESS
1. It is completely dependent on the efficiency of the postal system.
2. Customers are not able to assess the quality of goods before buying them.
3. Lack of personal contact with customers
4. High advertising costs e.g. cost of printing a catalogue
5. There is possibility of goods being lost or damaged in transit.
F. RETAIL CO-OPERATIVE SOCIETY
This is a form of co-operative in which many small independent retailers pool their resources together to enable bulk purchases and then sell the goods at lower prices. The profits are shared in proportion to the amount of purchase made by each member.
G. VARIETY CHAIN STORES
These are large retail stores which combine some aspects of both departmental stores and multiples shops. No notable example can easily be found in Nigeria.
Features of Variety Chain Stores
1. Many branches all over the country
2. Uniform shop design
3. They deal in variety of goods 4. Stores are under one roof but without clear divisions into departments 5. Centralized management as in multiple shops
EVALUATION
1. List four disadvantages of Mail Order Business
2. State five factors accounting for the growth of large scale retailing in Nigeria
READING ASSIGNMENT
Essential commerce for SSS by O.A Longe Page 25-31
WEEKEND ASSIGNMENT
1. A multiple shop has many stores which sell (a) locally produced goods
(b) manufactured goods (c) perishable goods (d) similar goods
2. Buyers often find mobile shops unsuitable because (a) The choice of goods is limited (b) They operates at odd hours (c) They sell only perishable goods (d) They are operated by sole traders
3. Which of the following offers self-service (a) hawking (b) peddling (c) mobile shop (d) departmental store?
4. Many stores under one roof is called (a) co-operative stores (b) departmental stores (c) multiple stores (d) supermarkets.
5. A large retail organization with a number of sections selling different goods in the same building is called (a) chain store (b) multiple shop (c) self-service shop (d) departmental store
THEORY
1. List three types of large scale retail outlets.
2. State three advantages of multiple shops to the customers.
GENERAL EVALUATION
Explain five advantages of large scale retailing
State five characteristics of departmental stores
List five disadvantages of hawking as a form of retailing
State five services provided by a retailer to his customers
List five factors that should be considered in starting a retail business
WEEK EIGHT
TOPIC: MODERN TRENDS IN RETAILING
CONTENT
1. Self –Service
2. Branding
3. After sales services
4. Vending machines/Automatic Vending
NOTES
Self-service: This is a method that allows customers to do their shopping in a shop with little or no assistance from sales attendants. The goods are conspicuously displayed and arranged on the shelves of shops with price tags. The customers goes about in the shop, examines the good displayed, compares them, tries them on, where necessary, select those of his choice and gathers them in a basket or tray made available in the shop, The customer finally approaches the check out counter where he pays for the goods bought to the cashier, This arrangement saves time because it avoid bargaining . Self –Service is associated with large scale retailer who have enough space and the necessary equipment e.g. supermarket, departmental stores, hyper markets etc
FEATURES OR CHARACTERISTICS OF SELF-SERVICE
Few shop attendants are required
Goods are displayed with price tags
use of trolleys and baskets is common
Customers move around to select their choice of goods
Large space is required
Security men or close – circuit cameras are employed to fore-stall pilfering
Goods are paid for at the check out counter
Goods are pre-packed and neatly labeled.
ADVANTAGES OF SELF SERVICE
Customers have freedom to select their choice of goods
Purchasing is quick and fast
Labour cost is reduced as there is no need to employ many sales attendants
It encourages impulse buying which increases sales
The spacious environment enhances the convenience of customers
The benefits of loss- leaders to both sellers and buyers can be maximized.
DISADVANTAGES OF SELF SERVICE
Shop-lifting or pilfering is rampant
More rapid deterioration of goods due to constant handling by customers
High cost of checking shop lifting or pilfering e.g cost of close circuit camera, store detectives can increase cost of operation.
Expensive facilities are needed e.g. larger floor space, trolley, baskets
Less personal attention is given to customers
It is not suitable for all types of goods
Self-service reduces employment opportunities for shop/store assistants
prices are not negotiable
Goods selected and paid for are not returnable
Setting it up is capital intensive .
BRANDING
This is a general term covering names, design, marks, symbols or description which may be used by a producer to distinguish his goods from that of other organization. Branded goods are therefore, goods sold under a refrigerated trade mark or trade name to distinguish one manufacture products from similar products of other manufacturers. Examples of brand or trade names are Elephant, Omo, Ariel for detergents: Pepsodent, Close up, Colgate, MacLean for toothpaste etc.
ADVANTAGES OF BRANDING
It ensures high quality goods
It saves cost of advertising
Consumer can select without any problem
Goods are standardized i.e. uniformly packed
It prevents product adulteration and imitation
branding aids inspection and ordering of goods by appropriate description
It encourages self-service
Recommended prices by the manufacturers can be shown in advertisement so that consumers are not cheated by retailers.
DISADVANTAGES OF BRANDING
Highly advertising cost
Branding can create impulsive buying on the part of the customers
Necessity to stock many brands of the products if the retailer is to please all his customers
Price cutting wars may be unhealthy for smaller firms.
EVALUATION QUESTION
1. What is self-service?
2. Give four reasons for the introduction of self-service
3. State five features of self-service
AFTER SALES SEVICES
After sales service: these are extra services which retailers render to their customers after purchasing their products in order to ensure constant patronage. The after sales services are usually extended to the buyer of a commodity free of charge. The extra services may be free delivery, free advice as to how the product concerned is used or operated free repairs, free fixing or installation of the article, replacement, maintenance etc. it may also be in form of a guarantee or warranty. It is used mainly for technical goods.
FACTORS DETERMINING THE LEVEL OF AFTER SALES SERVICES TO BE PROVIDED
Whether or not after-sales services will be provided, and to what extent will depend on the following factors:
Type of goods involved e.g. electrical appliances and drugs require the explanation of how they are to be sued.
The cost of the good; Goods that are expensive are necessary backed up with a guarantee
The practice of competitors: Where the selling of a particular article is very competitive, free deliveries could be offered to maintain customers.
Cost of rendering the after-sales services. If the sellers profit margins is not much affected them after-sales services are offered.
Legal requirements – some consumer protection laws require the seller to grant guarantee to the buyer.
ADVANTAGES OF AFTER-SALES SERVICES
Increased volume of sales
Customers enjoy better personal attention from sellers
Customers develop greater confidence in article bought when given guarantee
The quality of goods is assured.
Sellers goodwill and reputation is greatly improved
The manufacturer can easily keep his technical details secret
It enhances the usefulness of a product
DISADVANTAGES OF AFTER-SALES SERVICES
Higher price may be charged for the extra services i.e. the cost of such services are often included in the price of the goods.
Customers may be wrongly advised
Customer’s choice in maintenance is often limited.
AUTOMATIC VENDING/VENDINGMACHINES
This involved the sale of goods to customers through coin-operated (or card operated ) machined. The buyer drops the correct amount of coin or inserts a magnetic card into the appropriate slot or hole in the machine and get the product required. The machines are located in areas where large number of people converge e.g offices, schools, sport arena, cinema, churches, etc, the products sold through automatic vending are typically small and branded. E.g. candles, soft drink, ice cream, coffee, and tea, cigarette, snacks, postage, telephone service, automated tellers – that dispenses cash etc.
ADVANTAGES OF AUTOMATIC VENDING
Available for twenty four hours daily and every day of the week
Availability of a wide range of goods
The machine saves a lot of time
It saves labour cost. It makes little use of human labour and is therefore very useful for sales points where the volume of sales is low
Standard price is charged. i,e there is uniformity in price for the same quantity of goods
It is good for emergency situation e.g. automatic teller machines
Recording after slotting of money or cards makes for accountability
It ensures self-service
It economizes the use of space
Pilfering is avoided.
DISADVANTAGES OF AUTOMATIC VENDING
Cost of purchasing the machine is high
Customers can usually obtain only one items from a machine
It may be vulnerable to pilferage
It attracts additional maintenance cost.
Prices of goods are high as a result of the expensive machine used
Limitation to the wroth of goods to be bought where the machine accepts only coin
The buyer must hold the actual amount because there is no provision for balance or change
It offers-limited range of items
Faults in the machine may not be easily detected
A lot of money is spent on providing security
EVALUATION QUESTIONS
Explain the following and give three benefits of each
After sales service
Vending machine
2. Give the examples of after-sales services.
READING ASSIGNMENT
Comprehensive Commerce for SSS by J.U Anyale pg 87-89
Essentials Commerce for SSS by O.A Longe pg 30-32.
WEEKEND ASSIGNMENT
Automatic vending machine facilitate
(a) wrapping (b) cash deposit (c) sales of tools (d) self services
Which of the following makes sales possible without a sales attendant?
(a) telex machine (b) fax machine (c) vending machine (d) franking machine
The practice of offering a commodity for sale at an unprofitable price in order to attract buyer to a shop is known as
(a) auction sales (b) loss leader (c) price ring (d) market segmentation.
Which of the following cannot be sold through a vending machine?
(a) ice-cream (b) shoes (c) tea (d) tickets
Mail order firms largely depend on the services of the
(a) banks (b) insurance companies (c) mobile van (d) post offices.
THEORY
1. State four advantages of automatic vending
2. List two disadvantages of after-sales service
GENERAL EVALUATION
Give five reasons why retail shops adopt self service
Explain six facilities that a retail shop should have to encourage self service
Explain five types of large scale retailing
State five advantages of after sales services
List seven disadvantages of automatic vending
WEEK NINE
TOPIC: WHOLESALE TRADE
CONTENT
Functions of the wholesaler
Types of wholesaler or middlemen
3. The chain of distribution
4. Factors to be considered in choosing a channel of distribution for a commodity
5. Reasons why middlemen are sometimes omitted from the channel of distribution.
NOTE
Wholesale trade (wholesaling) involves the buying of goods in large quantities from the producers or manufacturing and re-selling in small quantities to retailer. A wholesaler is a trader who purchases goods in large quantities from the manufacturing and sell in small quantities to the retailers.
FUNCTIONS OF THE WHOLESALER
A. To the Manufacturer
1. He gives useful information and advice tot eh manufacturer e.g. in respect of level of demand for goods etc.
2. The wholesaler provides warehouse and storage facilities for storing goods, thereby helping the manufacturer to have enough space for further production.
3. Preparation of commodities for sale: The wholesaler sometimes label, package, blend or brand the goods before he sells them.
4. Advertising and promotion of goods: The wholesaler creates awareness for goods through advertising and sales promotion.
5. The wholesaler finances the manufacturer by paying for goods in advance
6. provision of transport facilities needed for the distribution of the goods.
7. Quantity of bulk buying. The wholesaler buys in larger quantities, this encourages the manufacturer to produce more and thereby reap the advantages of large scale production.
8. The wholesaler bears part of the risks involved in production and distribution of goods e.g. risk of a fall in price change in fashion, deterioration of goods. Etc
9. Quality control: The wholesaler may sometimes verify the quality of the products before distributing it i.e. grading of commodity products e.g. cocoa.
B. To the Retailer
The wholesaler breaks bulk by selling in small quantities to the retailer
The wholesaler finances the retailer by granting him credits
The wholesaler sometimes
Provision of advice and information e.g. on new goods, market trends
Stabilization of prices : By storing goods in his warehouse and thereby regulating supply to the marker, the wholesaler keeps prices fairly stable for retailers
he provides the retailer with a variety of goods.
TYPES OF WHOLESALERS OR MIDDLEMEN
General wholesalers
Specialist wholesaler
Cash and carry wholesalers
Factors (or Mercantile Agents)
brokers
Jobbers
Del Credere Agents (wholesalers )
Auctioneerss
manufacturer Representative
Commission Agents.
EVALUATION QUESTIONS
1. Outline five services rendered by the wholesaler to the manufacture
2. State five differences between a wholesaler and a retailer
3. Define the term wholesaling
4. List three functions of the wholesaler to the consumer.
CHANNEL OF DISTIBUTION
The channel of distribution describes the path through which goods moves from the products to the consumer.
The channel of distribution for goods could be any of the following:
Producer - Wholesaler - Retailers - Consumers
Producer - Wholesaler – Consumers
Producer - Retailers - Consumers
Producer - Agent - Retailer - Consumers
Producer - Agent - Consumers
FACTORS TO BE CONSIDERED BEFORE CHOOSING A PARTICULAR CHANNEL OF DISTRIBUTION OF A COMMODITY
1. The type of nature of the commodity e.g. whether it is a perishable good or durable goods.
2 Geographical consideration e.g the location of customers
3. The existing and potential demand for the commodity i.e the extent of demand for the product.
4. How regular the demand for the product is
5. The number of retail outlests in an area
6. The producers capital, financial position, organizational ability and selling skills
7. The size of customers orders
8. The quantity of goods involved
9. The channel used by competitors
10 The cost implication of the channel being considered
11. The customs of the particular trade e.g. distribution of newspapers
REASONS WHY MIDDLEMEN (WHOLESALER/RETAILERS) ARE SOMETIMES OMITTED OR ELIMINATED FROM THE CHANNEL OF DISTRIBUTION
1. When the producer is dealing with large orders from the customers.
2. When perishable goods are involved, it cannot be passed through a long channel of distribution.
3. Where the goods are of technical nature, and therefore, after-sales e.g. repairs are likely to be involved.
4. Where the producer operates his own retail outlets e.g FAMAD, Len nards
5. Where the consumers has ordered goods to his specification e.s special styles or customized orders.
6. Where the manufacturers operates a mail order business
7. Where the goods involved are durable and have a low turnover ekg, furniture
8. Where the goods involved is expensive and the buyer have to pay in advance before it is manufactured by the producer e.g. ships, aero plane, plants.
9. When new products are being introduced by the producer
10. When the producer wants to maintain fixed prices for his products
11. Where the goods are requested by Co-operative Consumers; Association i.e where consumers have combined their orders.
WHY WHOLESALE PRICES ARE LOWER THAN RETAIL PRICES
1. The wholesaler buys in bulk and at reduced prices
2. The wholesaler buys directly from the manufacturer
3. The wholesaler usually pays promptly or even sometimes pay in advance for goods – therefore he buys at a cheaper rate.
4. The wholesaler gets both trade and cash discount.
5. The retailer sells in units.
EFFECTS OR REASON WHY LARGE NUMBR OF MIDDLEMEN SHOULD NOT BE ENCOURAGED IN THE DISTRIBUTION OF GOODS
They increased the prices of goods
They cause artificial scarcity through hoarding of goods
They cause price differences in different areas
They cause inflation
It could encourage the distribution of fake or sub-standard product.
EVALUATION
Give six reasons fort the existence of the wholesaler in the channel of distribution
Why does the wholesaler need more/bigger operating capital than the retailer
State two advantages of any two channels of distribution to the producer
READING ASSIGNMENT
Comprehensive Commerce SSS page 34-37
Essential Commerce for SSS page 98-106
WEEKEND ASSIGNMENT
1. Which of the following is likely to have the highest rate of stock turnover? (a) bread (b) jewelry (c) machinery (d) furniture
2. The path through which a product moves from its manufacturing point to consumption is known as
(a) medium of exchange (b) chain of production (c) channel of distribution (d) product life cycle.
3. Manufacturers sells directly to consumers when they (a) want to make profit (b) wish to eliminate all transport costs (c) live for away from them (d) deal in perishable goods.
4. Which comes first in the channel of distribution? (a) Consumer (b) manufacturer (c) retailer (d) wholesaler
5. Who among the following assess goods on arrival at a port? (a) agent (b) importer (c) customs (d) ship owner
THEORY
State three channel of distribution of goods
State three reasons why wholesale prices are lower than retail prices.
GENERAL EVALUATION QUESTIONS
State six features of mail order business
List and explain six modern trends in retailing
Give five factors that determine the choice of a channel of distribution for goods
In what four circumstances will it be advantageous to eliminate the wholesaler from the channel of distribution
List six factors that have contributed to a decline in the importance of the wholesaler.
WEEK TEN
TOPIC: WAREHOUSING
CONTENT
Importance of warehousing
types of warehouses
Factors to be considered in sitting a warehouse
Documents used in warehousing
NOTE
Warehousing is the act of storing goods produced or bought in a place until they are needed. Warehousing ensures that there is a regular and steady supply of goods. A warehouse is a place where goods are kept until they are needed.
IMPORTANCE OF WAREHOUSING
It provides protection and security for goods.
It encourages large scale production it ensures production of goods ahead of demand.
It helps to stabilize prices of goods by reducing fluctuation of prices due to supply level.
It facilitates re-packaging and branding of goods.
It ensures constant and steady supply of goods throughout the year.
It provides employment opportunities e.g. for warehouse keepers.
It is a source of income for the owners e.g. rent received etc.
It promotes emancipator purchases.
TYPES OF WAREHOUSING
1. Ordinary warehouse: This may be called goods warehouse – i.e where goods are stored by traders and manufacturer until they are needed. It could either be;
a) Wholesaler warehouse
b) Manufacturers warehouse
c) Public warehouse
2. Bonded warehouse: This is a warehouse where goods whose customs duties have not been paid are stored until the duties are settled by the Owners. Bonded warehouse is privately owned by are under the supervision of the Customs Authority. They are usually located near the port (seaport or airport) for storing goods until the duties are paid.
3. State warehouse (Queen’s warehousing or Government warehouse ): This is a warehouse where seized contraband goods (e.g smuggled goods) are kept until they are sold on auction to members of the public.
EVALUATION
1. List and explain five types of warehouse
2. Explain five importance of warehousing in commerce.
USEFULNESS OF BONDED WAREHOUSE IN FOREIGN TRADE
Bonded warehouse provides security (safety) for goods imported from other countries whose duties have not been paid
The importer will be allowed adequate time to pay the charged customs duties
It facilitates foreign trade
The period of bond enables the customs authority to have enough time to inspect the goods and calculate the actual value of import duties.
Goods in bonded warehouse can be easily sold by the importer while in bond in which case the buyer will settle the import duty.
Production processes like branding, packaging, can be done while the goods are still in bond.
FACTORS TO BE CONSIDERED IN SITTING A WAREHOUSE
Location of the factory i.e proximity of the warehouse to the factory
Nearness to the market
Nearness to the distribution centres
operating costs (running cost) involved in the operation of the warehouse
cost of building or renting the warehouse
The mode of transportation to be employed
Consumers buying pattern
Good road network and availability of other infrastructure e.g telecommunication
Regular power supply e.g. for frozen food items
Presence of security and safety.
DOCUMENTS USED IN WAREHOUSING
Dock Warrant: This is the document issued by the warehouse authorities to depositor of goods. It is a document of title transferable by endorsement
Delivery Order; this is a document issued by a dock warrant holder to enable a third party collect a specified part of the goods from the warehouse.
EVALUATION
Write short notes on the following;
(a) Dock Warrant (b) Delivery Order
Outline five factors to be considered in sitting a warehouse
READING ASSIGNMENT
Comprehensive Commerce SSS page 37-39
Essential Commerce for SSS page 107-115
WEEKEND ASSIGNMENT
1. The receipt issued by a warehouse keeper for goods taken into the store is called
(a) warranty (b) dock warrant (c)customs warrant (d) drawback warrant
2. Warehousing is one of the functions of the (a) wholesaler (b) retailer (c) government (d) ministry of trade and industry.
3. Which of the following warehouses is generally found near a port?............warehouse (a) manufacturer (b) wholesaler (c) bonded (d) distributors
4. Who among the following is a middleman? (a) manufacturer (b) agent (c) insurer (d) consumer
5. An individual who makes the final use of goods and services provided by a firm is the (a) wholesaler (b) retailer (c) consumer (d) manufacturer.
THEORY
1. What is warehouse?
2. State three ways in which warehousing is important to commerce.
GENERAL EVALUATION
Explain six functions of the wholesaler to manufactures.
State six reasons why a producer may distribute goods directly to consumers.
List five advantages and four disadvantages of branding.
State five importance of warehousing to Commerce.
Give six reasons why manufacturers pre – package their products.
Comments
Post a Comment